Equipment Service

Scuba Views is proud to offer equipment service through Rec Tek Diving Repair. Las Vegas’ most fully equipped repair facility.

Annual service and Check-ups

Rec Tek offers annual service for regulators, pressure gauges, and minor repairs. We also offer a “Bench Test Only” option for those divers that want their regulator checked out before a trip without having a full annual service. We additionally service BC’s, dump valves, power inflators and tank valves.

Rec Tek stocks over 4500 parts and annual service kits for over 20 manufacturers.

Rec Tek is owned/operated by Mike Thompson, a master technician who has been a certified repair technician since 1975. Mike has manufacturer certifications from Mares, Oceanic, Scubapro, Sea Quest, Atomic, Sherwood, Genesis, Spare Air, US Divers, Aqualung, Apex, Zeagle, Dacor, Apollo, Tusa, Beuchat, Interspiro AGA, Aquavit, Aeris, Dive Rite, XS Scuba, and Advanced Diving Products.

The bench test & inspection includes a water test for any leaks, intermediate pressure check, and a flow test on the Peterbuilt Flow Analyzer from 0-12.5 scfm.

Full annual service includes pre check of system, full tear down, ultrasonic cleaning, component inspection, and reassembly using only genuine O.E.M. parts and service kits. All regulators are lubricated with Christo-Lube. Submersible pressure gauge swivels are rebuilt, bc inflator hoses are cleaned, new o’rings & shrader valves installed, and new batteries & hatch o’rings are installed in your computer. After adjusting to spec’s, the regulator is then put on the Peterbuilt “Quick Set” for 10 minutes, breaking in the seats, and the regulator is readjusted if necessary. The Peterbuilt “Pro-Check” (a liquid filled dual manometer) is then used to check the water tight integrity of the 2nd stage, with a complete flow test on the Peterbuilt “Flow Analyzer” from 0-12.5 scfm conducted. Last, a final submerged water test for leaks is conducted. Each customer is given a written report showing the results of the flow testing.

Retail Service and Repair Pricing

Regulators

1st and 2nd stages	$60.00 + parts
1st and 2nd stage with octopus	$90.00 + parts
1st stage only	$40.00 + parts
2nd stage only	$35.00 + parts
Octopus Inflator Combo (Air II, SS1, Air Source)	$35.00 + parts
Spare Air	$36.00 + parts
LPQD BC hose service	$10.00 + parts
Submersible Pressure Gauge swivel service	$10.00+ parts
HPQD hose service	$10.00 + parts
Computer Battery Change (Capsule style, non air integrated, includes wet pot test to 150fsw)	$20.00 + parts
Computer Battery Change (Air integrated, with hose or transmitter-receiver style, includes wet pot test to 150fsw)	$30.00 + parts
Interspiro AGA Mask Service	$75.00 + parts
OTS Guardian Mask Service	$75.00 + parts
O2 Clean 1st stage	$55 + O2 ready parts
O2 Clean K valve	$48.00 + parts
O2 clean SPG and hose	$20.00 + parts
Express Service 48 hour turnaround	+$25.00
Bench test with flow test	$20.00

BCs

(Note: We do not repair torn bags or bladder leaks)

Anual Service BC Inflator	$20.00+ parts
BC Flush, Service dump valve(s)	$15 + parts

Tanks

Eddy Current Test	$30.00
O2 Clean	$30.00
Tumble to remove corrosion	$30.00

Valves

K valve annual service	$24 + parts
J valve annual service	$30 + parts
Twin valve assy	$50 + parts

ALL PRICES ARE LABOR ONLY. PARTS ARE EXTRA.LABOR BY THE HOUR IS $30.00.LIFETIME WARRANTY PARTS AVAILABLE ONLY IF CUSTOMER CAN PRODUCE REQUIRED MANUFACTURER DOCUMENTATION. TYPICALLY THIS IS 1) PROOF OF ORIGINAL OWNER SUCH AS SALES RECEIPT OR WARRANTY CARD 2) PROOF OF ANNUAL SERVICE

SOME MANUFACTURERS NOW REQUIRE WARRANTY & ANNUAL SERVICE VERIFICATION WITH THEM TO OBTAIN FREE WARRANTY PARTS.